In 1949, BriskHeat® was founded by retired Two Star Major General Earnest Briscoe. BriskHeat manufactures flexible surface heating elements and controls / accessories for unlimited applications. Petrochemical, semiconductor, food processing, biotech, aviation, steel, laboratory, power generation and many other industries have found their solution with our heating products.
A broad range of experience in solving your applications for viscosity control, condensation prevention, process heat, and freeze protection has allowed BriskHeat to become the world-wide leader in flexible surface heat and heat trace applications for piping, vessels, pumps, valves, and other objects.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Link with
Province/City
Ho Chi Minh City
Industrial Park
Amata Industrial Park - Stage 1, 2,3
Location Map & Landmarks
On-sale Properties
NAICS/SIC/VN Code
327390
327332
327331
327120
3297
3272
3271
3259
3255
3253
3251
23910
Products of the company
FabRoc™ can be energized by a variety of power sources including: AC, DC, battery packs, 12V accessory outlets, motorcycle, ATV, golf cart, etc.
Voltage: 1V to 240V (engineered to your specifications)
Bend radius: 1/16” (1.6mm)
Moisture, chemical and UV resistant
Ultra-thin profile: 0.03” (0.8mm)
Specific gravity (Density): 1.19g/cm³
Hardness SHORE (A): 76
Tensile strength: 5 Mpa
Elongation: up to 200%
Flame resistant heating element: UL94 V1 rating
Operating temperature range: -58°F to 450°F (-50°C to 232°C)
Supply voltage: 110-120VAC or 208-277VAC
Nominal Power Output: 5 W/ft (16 W/m) at 50°F (10°C)
Cold temperature Power Output: 10 W/ft (33 W/m) at 32°F (0°C) in ice and snow
Maximum exposure temperature 150°F (65°C)
Moisture and flame resistant thermoplastic elastomer outer jacket
16 AWG bus wires
30” (76cm) long power cord with standard 3-prong grounded (NEMA-5-15) plug...
Warming case for caulk, adhesive, epoxy, foam, paint, tape, and other temperature sensitive items
Holds up to 6 large 28oz (828ml) size tubes
Portable use on a job site or in a vehicle
Moisture and chemical resistant
Lightweight design
Plug-and-play design, no special wiring
GFI protected for safe outdoor use (120V)
Crush resistant and exceptionally durable
Open and lay flat for 18" x 28" (457mm x 711mm) warming blanket
Maximum exposure temperatures up to 450oF (232oC)
Silicone rubber extruded outer sheath
Fiberglass knitted and braided heating element construction
Standard power density: 1.0w/in2 (.001w/mm2) [6 watts/ft (19.7 watts/m)]
Standard 60" (1524mm) power leads with:
120VAC: Separable standard 2-prong power plug (NEMA 1-15)
240VAC: Ferrule crimped wire terminated leads
Width: 0.5" (12.7mm)
Ingress Protection (IP) rating: IP54
Preset thermostat: Designed to maintain surface temperature at 120°F (49°C) in 32°F (0°C) ambient conditions*
Power density: 1.4 W/in2 (0.002 W/mm2)
Power cord: 6ft (2m) cord with power plug
Fits standard cylinders: 30lb, 50lb, and 125lb
Adjustable strap fits cylinder diameters:
Minimum 9” (229mm)
Maximum 13” (330mm)
Width: 6” (152mm)
Length: 26” (660mm)
Heater ingress protection rating: IP56
* Variations in ambient temperature and material contents within the cylinder may affect actual surface temperature of the cylinder.
Maximum exposure temperature: 1832°F (1000°C)
Maximum watt density: 76.2 watts/ft (250 watts/m)
Nominal voltage: 230VAC
Outer sheath material options: Copper, Stainless steel, Alloy 800 or 825, or Inconel 600
Heat Conductor: Nichrome, Copper, or Copper alloy
Dielectric Mineral Insulation: MgO = Magnesium Oxide
Cable diameter: 1/8” (3.2mm) up to 1/4” (6.5mm)
Custom made units for your exact requirements
Ingress Protection Rating: IP67 (waterproof)
Standard cold lead length: 1.64ft (0.5m)
Standard fastening screw connection: M20 x 1.5
Series resistance cable